George's Corvette Shop Parts Truck... George Reese specialist in fiberglass repair, and pushing his dragster

 from the 66 or 67 or 68 NHRA nats

photos from http://www.flickr.com/photos/57343654@N03/sets/?&page=3

VIDEO: Dallas Performance’s 1,302HP Corvette C6 Hits the Dyno

After some recent fails, let’s see a dyno test with a happy ending. This is a 2005 C6 Corvette built by Dallas Performance, which recorded a whopping 1,302 hp and 1,662 Nm (1,226 lb-ft) of torque on the rear wheels, according to the performance charts.

To achieve this, the tuning firm upgraded the V8 powerhouse with twin turbos, Performance Induction LS3 heads, RC120 injectors and single plane intake. The power is transferred to the rear wheels through a TR-6060 transmission and a C6 Z06 differential. The clip is available after the break.

By Csaba Daradics

Source: Youtube, Via: GTspirit

_______________________________VIDEO_______________________________

James Robbins’ Corvette Design Study: Close But No Cigar

Here at Carscoop, we love us some Corvette design studies. Heck, if we wanted to we could probably serve up a new one every day of the week.

Today’s CAD mock up comes from transportation design student James Robbins. Think of it as a C6.5, a stopgap measure between the current gen Corvette and a future C7 model. The design brief required Mr. Robbins to use the basic proportions of the C6, which limited what could be done with the design.

Now here’s my two cents:

I find the shape of the bootlid and the V-shaped side intakes to be quite pleasing to the eye, but the ugly Dodge Viper / Ferrari 458 Italia taillights don’t fit the car at all. Also, the front end styling is a bit too conservative and I feel that more could have been done with the glasshouse. The overall design is good but it’s hard to say if that’s due to Mr. Robbins’ tweaking or the C6’s nice proportions.

I can’t help but feel that with a little more work around the head- and taillights, this could have been a real stunner. As it stands, it’s a good effort though just not quite there. But don’t take my word for it. Voice your own opinion in our comments section.

By Tristan Hankins

Designer: James Robbins , Via: Yankodesign

_______________________________GALLERY_______________________________

Blast from the Past: Chevrolet’s Stunning 1973 Aerovette Concept

How do you replace a motoring icon? In the years leading up to 1968, U.S. automaker Chevrolet was dealing with this very problem with their venerable Corvette. The first and second generation Corvettes, designed by Harley Earl and Larry Shinoda respectively, were stylish and innovative creations that drew countless fans from the automotive community.

The answer lies, in part, with the Aerovette: a mostly forgotten concept that made just two auto show appearances before being relegated to the GM Heritage Museum.

In the late ‘60s, GM engineer Zora Arkus Duntov and his team were toying with the XP-882, a mid-engined design and engineering exercise built on Oldsmobile Tornado underpinnings. Though fascinating from a design and engineering standpoint, Chevy General Manager John DeLorean saw no future for the XP-882 and canceled the project in 1969. It was simply too expensive and too impractical for the impending 1970s America.

When Ford announced it would be selling the Italian designed / American engined De Tomaso Pantera at its Lincoln / Mercury dealerships in 1970, DeLorean hit the roof. He immediately ordered Duntov and GM designer Charles Jordan to dust off the XP-882 and ready it for the New York Auto Show.

Renamed the Aerovette, the XP-882 was a revolution. After being re-engined for the 1973 Paris Auto Salon, the Aerovette now featured four transversely mounted Wankel rotaries, a full five years before they would be popularized in the United States by Mazda’s RX-7. Beneath that sleek glass fibre skin was a steel and aluminium birdcage that was both lightweight and strong.

Innovative features abound such as the bi-fold gullwing doors, V-shaped front windscreen and deformable plastic bumpers. Pop up headlamps, a fully independent coil spring suspension and four wheel disc brakes were also incorporated into the design.

Inside, a digital instrument panel displayed speed and engine rpm, while a switchable screen could show fuel, water temperature, oil pressure or voltage. A second digital display in the centre console could display the date, time and radio station as well as the elapsed time in minute or seconds for time trials.

Though the Aerovette / XP-882 never progressed beyond the concept stage, its design was highly influential in the third generation (C3) Corvette. Many of its ingenious design features would find their way into production cars; though in some cases this process took as long as then years(!).

So there you have it. The Aerovette: a car that was ten years ahead of its time but doomed by the ‘70s oil crisis. Gone, but hopefully, never forgotten.

By Tristan Hankins

Photos: GM / Wikipedia

_______________________________PHOTO_______________________________

_______________________________________________________________________

_______________________________VIDEOS_______________________________

corvette

The weight of the car is approximately 1000kg, as it was designed for racing purposes and hence extra weight had to be curbed to meet the requirements of the racing track. The V 8 engine offers immense for a car of its design, and the Corvette SS claimed huge acclaim from racing fans and drivers alike.

The 50th anniversary of the Corvette Stingray Project was held at the Dubai International Motor Show, as the new model of the Corvette SS was on exhibit for customers. The new car sports Michelin tires, and has a carbon fiber roof and hood for a very attractive design. The rear rims of the car have been extended to a diameter of 20 inches, which is huge for a car of its type, and the Corvette SS still maintains all of its stylish looks and designs that it had around fifty years ago.

corvette ss

corvette ss

corvette ss pictures

corvette ss

corvette ss wallpapers

Chevrolet Corvette Stingray pics

Collection of cool Chevrolet Corvette Stingray sports cars including a few concept cars thrown in for good measure. Hope you like them!

The Chevrolet Corvette Stingray has got to me one of my favorite cars but they are very hard to get hold of and I can imagine the car insurance would be eye watering, not to mention the petrol consumption!

Mallett Corvette Z03

Many people are simply drawn to cool cars. Behind the artistry and superfluous lines lies the maker’s true passion to make an already existing work of art into something much more. This is what the 2009 USD Mallet Corvette ZO3 is. As a joint project of Mallet Cars of Berea, Ohio and Ugur Sahin Design from Gorinchem, Netherlands, the very powerful Corvette has just gotten a bit better.

The Team of USD B.V. had promising dreams for the Corvette C3. They already knew the capabilities of the favored supercar, which has a supercharger-twin turbo 7-liter V8 engine. But they wanted to create something that not had power in the inside, but it had to reflect on the outside as well. And thus they created something far more than design and style. It’s what they call Automotive Haute Couture.